Refinish My Floors, LLC – professional hardwood flooring company
Estimate

Project Spotlight · St. Paul, Baltimore, MD

Historic Home Floor Refinishing in St. Paul, Baltimore, MD

A recent project in the St. Paul neighborhood of Baltimore: the original yellow pine floors in this historic home date back to the late 1890s and early 1900s. They were worn and patched, with old radiator pipe holes and damaged boards, but the wood was worth saving.

We replaced the damaged planks with matching yellow pine, sanded the floors back to bare wood and finished them in gloss. Here is the full transformation, from before to after.

NWFA Certified Sand & Finisher Professional badge

NWFA Certified Sand & Finisher Professional

MHIC License #137004 · Licensed & Insured · NWFA Certified · 30+ Years Experience

Glossy refinished original hardwood floor in a sunlit room of a historic St. Paul home in Baltimore, Maryland
After: a sunlit room with its original floor refinished in a high-gloss finish.
Worn, patched and heavily scratched original hardwood floor before refinishing in a historic St. Paul home in Baltimore, MD
Before: worn, patched original floors with decades of finish wear and old repairs.

Before: Over a Century of Wear

Floors this old have a story. This one had worn-through finish, dark stains, patched boards and spots where earlier repairs had been sanded unevenly. It is the kind of floor many homeowners assume has to be replaced.

Original floors from this era are often worth keeping. The wood is old, tight-grained and part of the home's character, and it can usually be sanded and refinished.

Old damaged pine planks removed from a historic floor for replacement, with tools on the floor in Baltimore, MD
During: old damaged planks cut out so new boards can be fitted.

The Repair: Old Radiator Holes and Damaged Planks

Before any sanding, we dealt with the damage. Old radiator pipe holes had been cut through the floor, and the boards around them had been damaged over the years. Sanding and finishing over holes like these would only have shown them off.

We cut out the old planks and replaced them with new boards. The new boards had to match the original wood: the same historic yellow pine, which is not easy to find. We purchased it and used it so the repairs blend in with the rest of the floor after sanding and finishing.

  • Radiator pipe holes and damaged planks identified and measured
  • Old planks cut out and removed
  • Matching yellow pine sourced and fitted, which is hard to find
  • Then sanded and finished together as one floor
Matching yellow pine replacement boards laid out beside gaps in an original floor in a historic Baltimore, MD home
Matching yellow pine boards, hard to find, sourced for the repair.

Matching the Wood Is What Makes a Repair Disappear

Patching an old floor with the wrong species or a different grain shows once the finish goes on. Using the same yellow pine meant the new boards take the sanding and gloss finish the same way as the originals.

Narrow hallway with original hardwood floor sanded to bare wood in a historic Baltimore, MD home
A long, narrow hallway sanded to bare wood and ready for finish.

Sanded Back to Clean Bare Wood

We sanded the floors in stages to remove the old finish, stains and surface damage, working carefully so we kept as much of the original wood as possible. Our dustless sanding system captures dust at the machine, which matters in an occupied, older home.

  • Staged sanding to remove old finish and surface wear
  • Care around original trim, doorways and tight hallways
  • Dustless sanding to keep dust out of the rest of the home
  • Boards and patches blended into the surrounding floor
Gloss-finished original hardwood hallway floor in a historic St. Paul home in Baltimore, MD
After: the same hallway finished in gloss. The original grain and character stand out.

After: Finished in Gloss

The finished floors came out warm and bright. A gloss finish brings out the depth of the grain and the natural color variation of the original wood, and it reflects the light from the tall windows.

More Photos From the Project

Before, during and after in a historic Baltimore home.

Worn, patched and heavily scratched original hardwood floor before refinishing in a historic St. Paul home in Baltimore, MD
Before: worn, patched original floors with decades of finish wear and old repairs.
Radiator pipe hole cut into an old pine floor next to the baseboard before repair in a historic St. Paul home in Baltimore, MD
Before: a radiator pipe cutout in the old floor, with boards damaged by earlier work.
Old radiator pipe cutout and damaged floor boards beside the trim in a historic Baltimore, MD home
Before: an old radiator cutout and damaged boards.
Round radiator pipe hole in an original pine floor before board replacement in a historic Baltimore, MD home
Before: a round radiator pipe hole in the original floor.
Tape measure on damaged old floor boards above a radiator pipe in a historic St. Paul home in Baltimore, MD
Measuring the damaged boards over the radiator pipe so the replacements fit.
Old damaged pine planks removed from a historic floor for replacement, with tools on the floor in Baltimore, MD
During: old damaged planks cut out so new boards can be fitted.
Gap in an original pine floor with old paint and worn finish around it before board replacement in a historic Baltimore, MD home
Before: a gap in the original floor, with old paint and worn finish around it.
Opening in an old pine floor where damaged boards were removed before repair in a historic St. Paul home in Baltimore, MD
An opening where damaged boards had been removed, before the repair.
Missing boards in an original hardwood floor with replacement yellow pine planks staged on top in a historic Baltimore, MD home
Missing boards, with matching replacement planks staged and ready for the repair.
Matching yellow pine replacement boards laid out beside gaps in an original floor in a historic Baltimore, MD home
Matching yellow pine boards, hard to find, sourced for the repair.
Original historic hardwood floor sanded back to clean bare wood in a Baltimore, MD home
Sanded back to clean, bare wood, with the old finish and stains removed.
Narrow hallway with original hardwood floor sanded to bare wood in a historic Baltimore, MD home
A long, narrow hallway sanded to bare wood and ready for finish.
Gloss-finished original hardwood hallway floor in a historic St. Paul home in Baltimore, MD
After: the same hallway finished in gloss. The original grain and character stand out.
Glossy refinished original hardwood floor in a sunlit room of a historic St. Paul home in Baltimore, Maryland
After: a sunlit room with its original floor refinished in a high-gloss finish.

Recent Silver Spring, MD Floors

Solid oak floors from a recent Silver Spring job, sanded, stained and finished by our crew.

Refinished red oak hardwood floor in a sunlit living room in a Silver Spring, MD home
Red oak refinished with a warm brown stain, Silver Spring, MD
Refinished oak hardwood floor beside tall windows in a Silver Spring, MD home
Dustless sanding and refinishing, Silver Spring, MD
Golden amber custom-stained oak hardwood floor in a Silver Spring, MD home
Custom golden-amber stain on solid oak, Silver Spring, MD

Frequently Asked Questions

Where was this project?

This home is in the St. Paul neighborhood of Baltimore, Maryland. The original floors date back to the late 1890s and early 1900s.

Can damaged boards and old radiator holes in an old floor be repaired?

Yes. The key is matching the species. On this St. Paul project we cut out planks that had radiator pipe holes and earlier damage, and replaced them with matching historic yellow pine, which is hard to find. The repaired areas blend into the original floor after sanding and finishing.

Can very old, worn hardwood floors be refinished?

Often, yes. Old floors can usually be sanded and refinished if there is enough wood left above the nails. We check the condition and thickness at the estimate and tell you honestly whether to refinish or replace.

Do you work in older and historic Baltimore homes?

Yes. We are licensed throughout Maryland, including Baltimore City, and we have experience with older homes, narrow hallways, patched boards and original trim.

Will dust spread through an older home?

We use dustless sanding with vacuum-connected machines to capture dust at the source, so far less of it travels through the house.

How do I get an estimate?

Text or email a few photos of your floors to (240) 277-5953 for a fast estimate, or request a free visit.

Have Original Floors Worth Saving?

Send us a few photos and we'll get back to you fast with a free estimate.

Elegant hardwood floor background

Contact Us

Ready for a fast, free estimate? Contact us today—calls, texts, and emails answered quickly, even outside business hours. We proudly serve Montgomery County (Aspen Hill, Bethesda, Potomac, Rockville, Chevy Chase) and Baltimore County (Windsor Mills, Randallstown, and more).

(240) 277-5953, (240) 608-0854
Aspen Hill, MD 20906

Want the fastest estimate? You can attach photos or videos of your floors to a text message at (240) 277-5953 or to an email at [email protected]. Please include your property address.

By submitting this form, you agree to be contacted by Refinish My Floors, LLC via phone call, text message, and/or email regarding your inquiry. Message and data rates may apply. You may opt out at any time by replying STOP. Submitting this form does not guarantee service or a fixed estimate. Photos of completed projects may be used in our marketing on our website and social media; just tell us if you'd prefer yours not be. See our Privacy Policy and Terms of Service.